رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

افزونه درپوش Creality K1

Creality K1 lid extension

طراح: philipps3d

قیمت فایل با خرید و تحویل

۱٬۶۷۲٬۰۰۰ تومان

قیمت ارزی فایل
۴.۹ EUR
معادل تومانی
۱٬۴۴۱٬۰۰۰ تومان
کارمزد خرید
۲۳۱٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

- The lid extension for the Creality K1 raises the plastic lid by 60 mm and allows the temperature in the interior to be regulated using adjustable air slots. - Thanks to the adjustable openings, the housing cover no longer needs to be removed, even when printing PLA. For materials such as ABS/ASA/PETG/NYLON etc., the ventilation slots are closed in order to achieve the highest possible temperature in the build chamber. ▶︎ Printable on the CREALITY K1 ▶︎ Due to the greater distance between the extruder and the glass lid, the Bowden tube has more space and the filament is conveyed to the extruder more easily. ▶︎ A total of 8 sliders (two per side) can be moved continuously. ▶︎ The frame is divided into 3 identical segments, which can be joined together using guide lugs. There is a separate component with a recess for the cable routing at the rear right. ▶︎ All components can be printed without a support structure. ▶︎ The structural supports on the slotted hole are carefully removed after printing. ▶︎ The sliders are inserted into the frame segments from above and then the slider knob is screwed in via a thread. ▶︎ A lug in the frame ensures a low preload on the sliders. ▶︎ The housing extension is plugged onto the existing shoulder in the printer frame. ▶︎ All components have a constructive clearance on the functional surfaces to enable perfect assembly and movement. Here you can find the version for the larger Creality K1 MAX: https://cults3d.com/:1469026 ▶︎ Printing material: PLA/PETG/ABS/ASA/NYLON CF (the example was printed from PRINCORE PA12-CF) ▶︎ Nozzle: 0.4mm ▶︎ Filling: 15% ▶︎ Line height: 0.2mm ▶︎ Walls: 2 ▶︎ Support structure: without ▶︎ Recommendation: BRIM with 3 lines ▶︎ Printing time per segment approx. 5 hours Components to be printed ▶︎ 1x "wall_back_right.stl" ▶︎ 3x "wall.stl" ▶︎ 8x "slider.stl" ▶︎ 8x "knop.stl"

  • creality k1
  • 3d drucker
  • cover
  • deckel
  • tuning
  • creality
  • upgrade
  • 3d printing
  • 3d printer
  • k1
افزونه درپوش Creality K1 (Creality K1 lid extension) — فایل پرینتر سه‌بعدی (STL)