رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

تفنگ کشی WW3D 1911R

WW3D 1911R Rubber Band Gun

طراح: WW3D

قیمت فایل با خرید و تحویل

۱٬۵۳۳٬۰۰۰ تومان

قیمت ارزی فایل
۴.۴۹ EUR
معادل تومانی
۱٬۳۲۱٬۰۰۰ تومان
کارمزد خرید
۲۱۲٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Loading and Firing https://www.youtube.com/watch?v=ne2X3v9xELw Post Processing https://www.youtube.com/watch?v=COrDdkdL6ac Cura Custom Supports https://www.youtube.com/watch?v=N6w2KX-BUUk Here is the ultimate 3d printed rubber band gun. Modeled after a Colt Government Series 1911, the WW3D 1911R prints in place. That is right, no assembly, no glue, no screws. Just remove the supports load and fire. I have included a removable magazine and collapsible targets that fit in the magazine for easy storage. It fires #31 rubber bands so no need to spend money on over priced "rubber band gun ammo". Below is a link to the rubber bands this is designed for. If you use stronger rubber bands, or load more than four shots it may result in failure of the rotor. Alliance Rubber 96315 Advantage Rubber Bands Size #31, 1 lb Box Contains Approx. 850 Bands (2 1/2" x 1/8", Red) https://www.amazon.com/dp/B008X09PDC/ref=cm_sw_r_cp_apa_i_Pp.KCb72JE91W ****Because this is a highly detailed replica of an actual firearm, only print it bright colors to avoid it being mistaken for the real thing.***** Layer Height: 0.2 Supports: From build plate only, if you are using custom supports ensure to support the rotor and the axle is spins on. Also remove any supports that extend up into the body as they will be difficult to remove. 4 shells Infill: 30% Orient the model so that the barrel is pointed upward and tilted at a 15 degree angle towards the top of the gun as seen in the picture. Depending on your layer height, and your machine tolerances you may need to sand the edges of the rotor in order to remove the layer steps and allow for smooth operation.

  • rubber
  • rubberband
  • gun
  • toy
  • print-in-place
  • colt
  • 1911
  • print
  • in
  • place
  • band
تفنگ کشی WW3D 1911R (WW3D 1911R Rubber Band Gun) — فایل پرینتر سه‌بعدی (STL)