رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

سه شمشیر کاتانا تاشو زورو از ONE PIECE

3 COLLAPSING KATANAS - ZORO - ONE PIECE - (PRINT IN PLACE + ASSEMBLY VERSION)

طراح: PlayArt3D

قیمت فایل با خرید و تحویل

۹۳۳٬۰۰۰ تومان

قیمت ارزی فایل
۲.۴۹ EUR
معادل تومانی
۷۳۳٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

The file contains Zoro's 3 Katanas from One Piece PRINT IN PLACE VERSION + ASSEMBLY VERSION For the PRINT-IN-PLACE version, the blade is flat at the tip so it can stick to the build plate, if you want the pointed blade, you need to choose 1 of the other 2 versions The blade is thin, so you need to fix it very well to the buildplate. I recommend using RAFT plate Adhesion. If you are going to print the "print in place" version, I recommend that you test print the file "blade_print_test.stl" before printing the complete katana. It works better when you leave the seams on the back of the blade. Katanas are between 95 and 99 cm long, depending on how far you push the blades. Katana hilt 24.5cm + Blade 68.5/73.5cm If you liked this one check my other designs: https://cults3d.com/en/users/PlayArt3D/creations Prints well in PLA For a strongher Print i recommend using PLA+ / PLA850 Nozzle: 0.4mm If you need help or have any quetion feel free to contact me!

  • zoro
  • one piece
  • collapsing
  • katana
  • luffy
  • shanks
  • nami
  • kaido
  • sanji
  • anime
  • sword
  • play
  • enma
  • sandai
  • kitetsu
  • wado
  • ichimonji
سه شمشیر کاتانا تاشو زورو از ONE PIECE (3 COLLAPSING KATANAS - ZORO - ONE PIECE - (PRINT IN PLACE + ASSEMBLY VERSION)) — فایل پرینتر سه‌بعدی (STL)