رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

جاکارتی و کیف پول با بسته‌بندی عمومی

Cardholder-wallet (universal package)

طراح: safonovoa

قیمت فایل با خرید و تحویل

۵۶۵٬۰۰۰ تومان

قیمت ارزی فایل
۱.۲۴ EUR
معادل تومانی
۳۶۵٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

I present to your attention a universal card holder. From this set of parts, you can assemble the original holder for 4, 6, 8, 10 or 12 plastic cards. If you use a 4 or 6 card holder, you can print a smooth back cover, or you can print a cover with a clip. Thanks to the lever, the cards are easy to get in the form of a" ladder". All parts are adapted and do not require support when printing, and if the adhesion to the table on your printer is good, then you can not use the brim. I suggest you take a look at my new work Cassette Cardholder https://cults3d.com/en/3d-model/home/cassette-cardholder-wallet A small video tutorial on assembling a wallet: https://drive.google.com/drive/folders/1v14Ya73upy9vZbRtMILVdvZAwqPtWmrG?usp=sharing See also FREE BACK PLATE WITH LOGO https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-punisher https://cults3d.com/en/3d-model/home/cardholder-wallet-2in1-only-back-plate-with-logo-sea-of-thieves https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-squid-game https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-business-card-squid-game https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-cyberpunk https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-cs-go https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-fortnite Tesla design done by LITTLETUP https://cults3d.com/en/3d-model/gadget/tesla-cyberwallet I recommend using PETG or ABS plastic for printing. Layer thickness 0.2 mm NO SUPPORT! If you need additional protection for this card holder, you can download the sleeve model from OvCa77 https://cults3d.com/en/3d-model/gadget/tpu-sleeve-for-card-holder

  • wallet
  • cardholder
  • card
  • cards
  • money
  • holder
  • moneyclip
  • clipmoney
  • plasticcard
  • accessorie
  • cyberpunk
  • 2077
  • fortnite
  • punisher
  • squid
  • seaofthieves
جاکارتی و کیف پول با بسته‌بندی عمومی (Cardholder-wallet (universal package)) — فایل پرینتر سه‌بعدی (STL)