فیگور اکشن سهبعدی سایکلون سنتوریون Battlestar Galactica، مقیاس 3.75 اینچ، سبک رترو Kenner
Battlestar galactica ,CYLON CENTURION – 3D, Action Figure Scale: 3.75” kenner Retro-style
طراح: DESERT-OCTOPUS
قیمت فایل با خرید و تحویل
۱٬۶۷۲٬۰۰۰ تومان
- قیمت ارزی فایل
- ۴.۹ EUR
- معادل تومانی
- ۱٬۴۴۱٬۰۰۰ تومان
- کارمزد خرید
- ۲۳۱٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
The relentless enemies of humanity are back! This 3D printable Cylon Centurion is inspired by the original Battlestar Galactica (1978) series and reimagined in classic retro proportions. Designed for fans of vintage sci-fi and collectors who love bringing iconic characters to life in physical form. This figure features 5 points of articulation and includes its two signature weapons. Perfect for display, play, or customizing your retro sci-fi lineup. Thanks for supporting original designs made for 3D printing! 🛠️ Recommended Print Settings for Retro-Style Action Figure (Separate Parts) Whether you're printing with resin or filament, here are some ideal settings to get the best results for your retro-style articulated figure: 🧵 FDM Printers (PLA/ABS Filament) Layer Height: 0.12 – 0.20 mm Nozzle Size: 0.4 mm Extruder Temperature: 200–210 °C (PLA) | 230–250 °C (ABS) Bed Temperature: 60 °C (PLA) | 90–100 °C (ABS) Print Speed: 40–60 mm/s Bed Adhesion: Use a raft – highly recommended, especially for parts with no flat surfaces or rounded bases Supports: Enable as needed for overhangs (adjust angle to suit) Retraction: Enabled to prevent stringing 💎 Resin Printers (SLA/DLP) Layer Height: 0.025 – 0.05 mm Initial Exposure Time: 30–60 s (depending on resin/printer) Normal Layer Exposure: 1.5 – 2.5 s per layer Bed Adhesion: Use a raft or solid base in your slicer – especially important for parts without flat bottoms Orientation: Tilt parts 30–45° to reduce suction and enhance surface detail Supports: Use medium or light supports, positioned to avoid marring visible areas 📌 General Tips: Print parts individually for cleaner results and easier post-processing. Use 0.3 – 0.5 mm tolerance for peg joints or snap-fit connections. Cure resin prints thoroughly before assembly for best durability. Light sanding may help parts fit more smoothly in FDM prints. Some parts may have no flat base, so using a raft is strongly recommended to ensure proper adhesion and stability during printing. 🧩 Loose joints? Here’s a quick fix: If joints feel loose, or become looser over time, you can wrap a small piece of adhesive or masking tape around the pegs before inserting them. This simple trick improves grip, reduces wear, and helps preserve the poseability and playability of your figure.
- battlestar galactica
- cylon
- centurion
- 3d
- action figure
- scale
- 375”
- kenner
- retro
- style