صفحه پشتی ماسک
Backplate for mask - Back plate
طراح: RTprops
قیمت فایل با خرید و تحویل
۱٬۴۰۳٬۰۰۰ تومان
- قیمت ارزی فایل
- ۴.۰۹ EUR
- معادل تومانی
- ۱٬۲۰۳٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS CU - Commercial Use — فروش محصول چاپشده مجاز است
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
The back plate is an important fastening element in my masks. This design was developed by me about 8 years ago and despite the apparent simplicity, it is a good solution. 4 attachment points (2 straps) is enough for most cosplay projects, but if your mask weighs more than 600-700 grams, I advise you to use an additional 5 attachment point. If you want to be able to adjust the tension of the straps, I suggest using buckles with two slots (also 30mm). Also, pay attention to the width of the rubber band. This back plate is designed for 30mm wide tape. I can also create a 3D model of a branded back plate for you with your logo. You can see an example in the last 3 pictures. This service will cost you $20. Send me a private message if you need details UPD 11 AUG 23: added backplates with EvoFox, CyberCat and EvoWolf logos UPD 03 MAR 25: Added a 3d model of the buckle. in case you want to print this yourself These settings are recommended as a baseline for achieving good print quality. Adjust them based on your printer and material. General Settings (quality-oriented): Layer height: 0.12–0.2 mm Wall/perimeter count: 3–4 Infill: 10–15% (gyroid or cubic recommended) Top/Bottom layers: 4–6 Print speed: 40–60 mm/s Nozzle: 0.4 mm Materials: PLA - easiest to print, good for display PETG - more durable and heat-resistant (recommended for wearable use) Supports: -Use supports “from build plate only” where possible to simplify cleanup Diffusers: For the diffuser eye modules, use transparent or semi-transparent filament (or resin) to achieve proper light diffusion. Post-processing (optional): -Sanding and priming recommended for a smoother finish -Painting compatible with standard acrylics and spray paints
- mask
- cosplay mask
- rtprops
- backplate
- mounting
- back plate