برج تاسانداز خودکار
Automatic Dice Tower
طراح: 3DTechDesigns
قیمت فایل با خرید و تحویل
۱٬۵۳۵٬۰۰۰ تومان
- قیمت ارزی فایل
- ۴.۵ EUR
- معادل تومانی
- ۱٬۳۲۳٬۰۰۰ تومان
- کارمزد خرید
- ۲۱۲٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
All 3DTechDesigns STLs are protected under Copyright Law. When purchased on Cults3D you have the right to print it for personal use. To legally sell prints of my designs a **monthly active** subscription on patreon is required: https://www.patreon.com/3dtechdesigns ---------------------------------------------------------- **REEL:** https://www.instagram.com/reel/DLVZBq5s0-L/?igsh=YzIwdWp2Y2JqZzho After a lot of testing I am happy to finally release a new mechanical dice tower. What makes this dice tower special, is that it rolls the dice fully automatically by a simple up and down movement of a lever. A platform moves the dice upwards, where they are then dropped back down by a trapdoor. It does not matter how quickly the lever is operated because the trapdoor onto which the dice are thrown always opens at exactly the right moment. **Assembly:** The assembly is great fun due to its simplicity. A large part of the mechanism is print-in-place designs, meaning it comes fully assembled and functional from the print plate. No extra tools or glue are needed because everything is printed. As can be seen in the pictures, two versions of the tower are included, one of which does not require the print in place planetary gear, thus reducing the number of printed parts. **Assembly-guide on youtube:** https://youtu.be/CQ-179IuEYM **Dimensions of the assembled tower:** - 119x140x133mm **Minimum printbed size:** 140x140x140mm **Amount of filament needed:** ~400g of PLA These settings can be applied to every part: • Print orientation is already correct and should not be changed • Recommended layer height up to 0.25mm • 2-3 perimeters • No supports • 10-20% infill • 0.4mm nozzle
- mechanical
- dice
- dice tower
- automatic
- geared
- gears
- dnd
- dungeons and dragons
- tabletop
- 3dtechdesigns
- mtg
- tcg
- magic the gathering
- mechanism
- print in place