رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

اسباب‌بازی مار کبرا مفصلی قابل‌چاپ سه‌بعدی

ARTICULATED COBRA SNAKE FLEXI PET PRINT-IN-PLACE

طراح: Kevins3D

قیمت فایل با خرید و تحویل

۷۲۷٬۰۰۰ تومان

قیمت ارزی فایل
۱.۷۹ EUR
معادل تومانی
۵۲۷٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

This is Articulated cobra with 1 heads that requires No supports. It is a Print-in-place design no assembly required Please feel free to share images of your prints on this page, I would love to see 'em. Thank you. Check out [ARTICULATED COBRA]( https://cults3d.com/en/3d-model/game/articulated-cobra-snake-with-3-heads-flexi-pet-print-in-place) Check out [ARTICULATED FROST DRAGON]( https://cults3d.com/en/3d-model/game/articulated-frost-dragon-articulating-flexi-wiggle-pet) Check out [GIANT ARTICULATED DRAGON WITH 3 HEADS](https://cults3d.com/en/3d-model/game/giant-articulated-dragon-with-3-heads-flexi-wiggle-pet-chunky-dragon) **Print testing, Images and Videos are created by** [Made In Space](https://www.youtube.com/c/MADEINSPACES/featured) Make sure you have a good first layer or you can use a raft because it has a lot of small parts. Also, make sure your printer is well calibrated or you will end up with a lot of cleaning up. It is best to use a thick first layer (10 mm/s and 0.25 - 0.3 mm). We used a 0.4mm nozzle 0.16 mm layer height a raft 10 % infill No supports Printer Ender 3 v2 Print speed 50 mm/s

  • cobra
  • articulated cobra
  • articulated
  • flexi
  • no supports
  • dragon
  • king cobra
  • snake
اسباب‌بازی مار کبرا مفصلی قابل‌چاپ سه‌بعدی (ARTICULATED COBRA SNAKE FLEXI PET PRINT-IN-PLACE) — فایل پرینتر سه‌بعدی (STL)