قاب برد Arduino Uno
Arduino Uno Enclosure
طراح: wgermers
قیمت فایل با خرید و تحویل
۳۴۷٬۰۰۰ تومان
- قیمت ارزی فایل
- ۰.۵ EUR
- معادل تومانی
- ۱۴۷٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
This 3D printable enclosure is designed to house an Arduino Uno development board while protecting it from dust, dirt, and mechanical damage. The design consists of a base enclosure and a removable lid. The enclosure is designed so that the USB port and power connector remain accessible from the front side, allowing convenient programming and power connection without opening the case. At the rear, there is an opening for an M16 cable gland, enabling secure routing of external wiring into the enclosure. A small access hole in the lid allows the reset button of the Arduino Uno to be pressed using a paperclip or similar thin object, so the board can be reset without removing the cover. The enclosure is intended to be assembled with threaded holes in the printed parts: - 4× M4 tapped holes in the enclosure for mounting the lid - 4× M2.5 tapped holes for mounting the Arduino Uno Recommended screws - 4× M4 × 12 mm (for the lid) - 4× M2.5 × 6 mm (for the Arduino Uno) If preferred, self-tapping screws for plastic of a comparable size can also be used instead of tapping the holes. The enclosure itself can be mounted to a surface using two 4 mm bolts or screws. Important: This enclosure is not waterproof, but it provides effective protection against dirt and accidental mechanical damage, making it suitable for many indoor projects, prototypes, and workshop environments. Designed to be 3D printed without minor supports. (only the lid wll need supports at te mountingholes)
- arduino
- arduino-uno
- arduino-case
- arduino-enclosure
- arduino-box
- prototyping
- electronics