رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

ریل چهارگانه بست لوله AEA HP MAX .35 .45 S45

AEA HP MAX .35 .45 S45 Regular/Mini Barrel Band QUADRAIL

طراح: RCX2020

قیمت فایل با خرید و تحویل

۹۳۵٬۰۰۰ تومان

قیمت ارزی فایل
۲.۵ EUR
معادل تومانی
۷۳۵٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

***Very sorry but since all my other designs get stolen and sold so much by so many while I try to keep them free and there's nothing I can do about it, I have decided to start charging for my work instead of letting only these lazy thieving bastards make money off my ideas*** ***Check out my handguard with free floating barrel at: https://cults3d.com/en/3d-model/tool/aea-handguard-m-lok-357-floating-barrel*** **THERE'S SOME QUESTION ABOUT THE MEASUREMENTS OF THE 357 BARREL BANDS WHERE SOME PEOPLE REPORT A 2MM SPACE BETWEEN BARREL AND TANK AND SOME REPORT 2.9MM... I'VE ADDED BOTH. PRINT THE FIRST 5MM AND SEE IF IT FITS, IF NOT TRY THE OTHER AND PLEASE REPORT BACK TO ME SO I KNOW WHAT THE HELL IS GOING ON.** ***Had to take out the STL for the .50 because I got the wrong measurements. So still don't know if the .45 also fits the .50*** **Check out the new cable clamps to go with this design: https://cults3d.com/en/3d-model/tool/picatinny-cable-clamps-cable-management** ***You might need a half round and a round file to adjust and smooth the inside of the quad rail to make it slide all the way back (I did) as the clearance between the tank and barrel varies ever so slightly from front to back.*** I also need to make a second design to account for the pressure gauge on models with regulators (in the pictures the regulator plug is still installed on my gun, I just removed the pressure gauge). For those who want more railspace and protection for their barrel and air tank (for those who want the "light" version go to: https://cults3d.com/en/3d-model/tool/aea-hp-max-45-50-barrel-band-with-picatinny-rails) Also check the link above for instructions. Only difference being that this design uses 8 screws. Design is split in two parts for ease of printing on mainstream printers. PLA+ seems to work well. Nylon would be even better. Layer height 0.2 or smaller Support: Yes, regular, everywhere BUT exclude the screw holes!!! Adhesion: Yes

  • aea
  • b&w
  • hp max
  • 45
  • 50
  • m50
  • s45
  • barrel band
  • picatinny
  • weaver
  • pcp
  • air gun
  • quad rail