رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

ماژول پیشرفته نظم‌دهی ابزار A.T.O.M.

Advanced Tool Organizing Module (A.T.O.M.)

طراح: ATOM_Engineering

قیمت فایل با خرید و تحویل

۳٬۱۱۵٬۰۰۰ تومان

قیمت ارزی فایل
۹.۱۳ EUR
معادل تومانی
۲٬۶۸۵٬۰۰۰ تومان
کارمزد خرید
۴۳۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Introducing *A.T.O.M.* A custom-built tool organizer, designed to be installed between the linear modules on the Snapmaker 2.0 A250 or A350 model. Although this system could also be implemented on other printers given the necessary spatial requirements are met. Printed using Fulament Matte black and orange PLA. [Purchase Filament Here] (https://www.amazon.com/Fulament-Matte-Black-1-75mm-Filament/dp/B07Q87857C/ref=sxts_rp_s1_0?cv_ct_cx=filament%2Bpla&gclid=Cj0KCQiAqvaNBhDLARIsAH1Pq53FXKH6duLg5h30V1vvQ7P2pxKR8OyBoGcbojdNYJoAnH8hYyYFkagaAgVDEALw_wcB&hvadid=500111449867&hvdev=c&hvlocphy=9032828&hvnetw=g&hvqmt=e&hvrand=12967036695306126396&hvtargid=kwd-1000643726282&hydadcr=8495_9757443&keywords=fulament%2Bpla&pd_rd_i=B07Q87857C&pd_rd_r=a79b3038-768b-43ff-8971-129980755f23&pd_rd_w=vmpXO&pd_rd_wg=aIYTU&pf_rd_p=29dcfc78-5030-4047-b3bb-fd095cf7aa8a&pf_rd_r=3AZN78MJ2XZ2MRXPQ3SM&qid=1639875327&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6&th=1) --- Problem Statement⚠️ --- I frequently found myself needing to access the same set of tools, hardware, and accessories while working with my Snapmaker A250. Which got me thinking, why not design an integrated drawer system with custom foam cutouts. Helping to alleviate my problem, and giving me quick access to these key components. --- Design Context ⚙️ --- I started this design by down-selecting the critical tools, hardware, and accessories I wanted to store within the drawer. From there I began arranging them as efficiently as possible with the limited space I had. I quickly realized that I would need a two-tier system in order to fit all the components. So I decided to design a quick detach insert that is held in place via magnets just above the lower foam organizer. Giving me space to hold a 14mm and 17mm wrench. As well as the two variations of M4x10 screws used during the transition from the 3D printing bed to the laser cutting bed. The ability to quickly remove the insert provides access to the lower tier of components and functions as a portable carrier for the screws. --- Bill of Materials --- [Double Sided Tape] (https://www.amazon.com/YYXLIFE-Adhesive-Removable-Multi-Purpose-Hardwood/dp/B07H88SWCM/ref=sr_1_1_sspa?keywords=carpet+tape+double+sided&qid=1639880370&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTDhCQUI2SkIwOVJOJmVuY3J5cHRlZElkPUEwNzEzMTg3MUo0Qlo4STNaRU9DVyZlbmNyeXB0ZWRBZElkPUEwNTAwOTgyM0xUTE5LUlpOUTFQSyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=) [Choose your own color - 2mm Foam Sheets] (https://www.michaels.com/12x18-foam-sheet-by-creatology/M10597609.html?dwvar_M10597609_color=White) [Black 6mm Foam Sheet] (https://www.michaels.com/creatology-foam-sheet-6mm/M10390268.html) [8'' Drawer Slides] (https://www.amazon.com/Rilexawhile-Extension-Bearing-Cabinets-etc-Black/dp/B087WVRZ1R/ref=sr_1_17?keywords=8+in+drawer+slides&qid=1639956415&s=hi&sr=1-17) [8mm x 3mm Magnets] (https://www.amazon.com/gp/product/B07MV2MKD5/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1) Optional: Super Glue. *Note: In the unfortunate event of any of these above products becoming unavailable or out of stock, look for a different manufacturer but make sure to check dimensions before ordering* If you enjoy this project and want more details, including the assembly process then feel free to follow me on Instagram for more engineering projects related to: - 3D printing - Arduino Projects - Design [ATOM Engineering Instagram](https://www.instagram.com/atom.engineering/?hl=en) --- Slicer Settings --- - Infill Density: 10% - Fill Pattern: Gyroid - Layer Height: 0.3mm - Perimeters: 3 - Solid Top Layers: 6 - Solid Bottom Layers: 3 Additional Note: The colored screw inserts are designed to be a close fit but not a press fit, a small dab of super glue is advised. --- Print Time: ~22 hours (All Components) --- *3D printed parts have basic geometries so print settings are entirely up to you, these were just the ones I used.* --- Laser Cutting Settings --- Unfortunately, I can't upload the .nc laser files to Cults. But I've added the DXF files for the two main organizers. You'll need to create your own rectangles for the colored foam inserts, I just drew them using Luban. You can use the STL versions of the organizers to ensure your laser cut will fit correctly. *Note: The "Detachable insert foam organizer.DXF" should maintain the 1:1 scale. Although double-check that the width or height matches that of the STL version of that component. As for the "Main Drawer Foam Organizer.DXF" I noticed that the Luban kept shrinking it thus breaking the 1:1 scale, so make sure to adjust the height to 250mm (It will take up the whole laser bed workspace). *

  • tool organizer
  • custom design
  • drawer
  • snapmaker
  • printer accessories
  • organizer
  • laser cut
  • custom drawer
  • a250
  • a350
  • printer modification
  • mods
ماژول پیشرفته نظم‌دهی ابزار A.T.O.M. (Advanced Tool Organizing Module (A.T.O.M.)) — فایل پرینتر سه‌بعدی (STL)