رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

پایه دوگانه فیش Anderson 50A

Double 50A Anderson Plug mount

طراح: stoicdesignsstore

قیمت فایل با خرید و تحویل

۹۲۱٬۰۰۰ تومان

قیمت ارزی فایل
۲.۴۵ EUR
معادل تومانی
۷۲۱٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

The lip or groove on the top cover sits inside the groove of the base to prevent water ingress. For an added level of security, a very thin bead of silicone can be applied to this groove to create a silicone gasket between the two pieces. Print in PETG or ASA and use stainless steel M5 countersunk bolts if exposed to the weather. Install: Decide on your install location and scribe the rectangle cut outs, 4 main bolt holes and the two Anderson plug (M3) mounting points on the base plate to the mounting surface. Drill all holes and cut out within marked areas for electrical cable. Install base plate with small amount of silicon on the mounting surface and secure each Anderson plug with M3 bolt through the plug and into the mounting surface (align the end of the Anderson with the edge of the base plate vertically). Do not overtighten the bolt. Place the cover over the Anderson plugs and secure the cover and base with M5 countersunk bolts. Printed in PETG or ASA Base laying down, top upright 0.6mm Nozzle, 0.2mm later height, speed 55mm/s 3 layer wall thickness, 4 bottom, 6 top, 25%infil

  • anderson plug
  • 12v
  • electrical
  • mount
  • anderson mount
  • canopy
  • cover
پایه دوگانه فیش Anderson 50A (Double 50A Anderson Plug mount) — فایل پرینتر سه‌بعدی (STL)