رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

زنجیر شنی مدل Sd.Kfz.251 Zgw5001/280/140 در مقیاس 1/35

1/35 scale Sd.Kfz.251 Zgw5001/280/140 track links

طراح: HomeBrewParts

قیمت فایل با خرید و تحویل

۴۹۴٬۰۰۰ تومان

قیمت ارزی فایل
۱ EUR
معادل تومانی
۲۹۴٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

1/35 scale track links for Sd.Kfz.251 and Sd.Kfz.11 series. Includes separate inner and outer track pins. Fits Dragon kits directly. For AFV kit, you will need to remove some material from sprocket wheel, where guide horn goes. This hole, along with guide rollers is molded non symmetrically on their kits, therefore it must be modified to fit correct shape and scale track links. Print @20 to 25 micron steps. Position at angle to the build plate (at least 20 deg). If using auto-supports, use small at 90% density or higher. Support settings small, contact shape - none, contact depth - 0.1, contact diameter 0.15-0.18. Dont forget to add supports to handles, brackets etc (look at pictures of printed model). I have printed them at various orientations successfully. Track pins are conical, and are designed for snug fit. However, due to nature of 3D printing, geometry of the holes highly depends from resin used and printing settings. Therefore, holes might need some cleanup. I chose to use many small supports, as they are easy to remove, and cleanup. Big supports equals to big blob to remove, and this is not fun with small parts.

  • 1/35
  • 1-35
  • sdkfz 251
  • track link
زنجیر شنی مدل Sd.Kfz.251 Zgw5001/280/140 در مقیاس 1/35 (1/35 scale Sd.Kfz.251 Zgw5001/280/140 track links) — فایل پرینتر سه‌بعدی (STL)