مدل تفنگ مسلسل Browning M1919 M1919A4 کالیبر 30 مقیاس 1:1
Browning M1919 (M1919A4) 30 Cal Machine Gun 1:1
طراح: TazMan2000
قیمت فایل با خرید و تحویل
۱۴٬۱۲۷٬۰۰۰ تومان
- قیمت ارزی فایل
- ۴۱.۴۲ EUR
- معادل تومانی
- ۱۲٬۱۷۸٬۰۰۰ تومان
- کارمزد خرید
- ۱٬۹۴۹٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
Designed from the actual blueprints, this is a highly accurate (outside) replica of this famous weapon. While it can't be made to fire, this design has many movable features if you chose to follow my detailed instructions. The front and rear sights can fold up and down. The charging handle can be retracted which moves the belt feed lever along a cam, the extractor along a cam, and also moves the belt feed slide, just like on the real weapon. The trigger is also movable and the feed cover opens to reveal a detailed interior. This weapon is the precursor to the M2. A 1/2" Copper pipe should be used to add strength to the barrel. Also, a few other brass pins/tubes and screws will need to be purchased in order to align and strengthen the design for vehicle display. The 1/2" copper plumbing pipe sizes to North American standards. You will need files, drills, sandpaper, paint and a few other objects to fully build this prop in order to get the most realistic appearance. You will not be able to just print parts and glue together. It is designed for parts to be post processed before assembly. This model contains a LOT of parts and is NOT a one-piece model. Its not one of those models you just print and glue together. Post processing will be necessary. You should have a FDM printer with a 12" bed. You may be able to subdivide the model for smaller printers using Meshmixer or other software but that is your responsibility. It may not be printable on 3d belt printers. If you have a question, "Message" me. This is a prop. NOT A FIREARM. It cannot be made into a real weapon. An airsoft or paintball conversion may be possible, however this was not initially designed for that purpose. If you are interested in making this weapon into the version the "Terminator" used in Rise of the Machines, I have uploaded a totally ficitious ammo drum which will fit into the receiver area. If anyone is interested in a neat looking flash hider, check out this... https://cults3d.com/en/3d-model/various/m1919-flashhider The 44mm version will fit this design. The parts Feed Cover and Right Plate Part 2 have been slightly modified to fit together better. If you can, please download the new parts called Right Plate Part 2 (Redo).stl and Feed Cover (Redo).stl. For best results, you should have a FDM printer for most parts. Most parts can be printed at 0.2mm, with 4 walls and ironing enabled. There are a few pieces that would be best printed on a resin printer due to the high detail and accuracy. Your FDM print bed should accommodate X185 Y99 and Z167. This is a prop. NOT A FIREARM. It cannot be made into a real weapon. An airsoft or paintball conversion may be possible, however this was not initially designed for that purpose.
- m1919
- 30 cal
- army
- machine
- gun
- weapon
- prop
- airsoft